CR250 (1987-2001) – Electric starter
$1,375.00 USD – $1,495.00 USD
This kit fits the CR250 from 1987 to 2001. This kit is a non charging stator type, so you will have to recharge your battery every 100-125 starts. There are some lighting stator on the market that could be used to transform this in a charging configuration.
You will be getting:
|Aluminium billet cover|
|Main ring gear|
|Gaskets and hardware|
The complete kit with lithium battery will add 5.7 lb.
- 3/8 drive Socket ranch
- Socket ranch extension
- 8mm socket
- 10mm socket
- 17mm socket
- 5mm Allen drive bit (long tip)
- 4mm Allen drive bit
- 60-150 in-lb torque wrench
- ½ drive 150 ft-lb torque wrench
- RTV silicone
- 3/4 drill bit and a drill
Main steps installation
- Battery box and wiring harness installation.
- Main gear installation
- Starter housing installation
- Starter and battery connection
- Side panel and seat re-installation
PRESS THE BUTTON AND GO HAVE FUN !!
It is recommended to flush the oil after the first ride to eliminate particles generated by the gears first meshing and break in. Taking cover off to remove all particles is recommended versus only using the drain plug.
On a normal basis, change the oil at the same time as transmission oil.
All merchandise manufactured by Panthera Motorsports has a warranty against manufacturing defects for a period of one (1) year from the date of original shipping. (See details)
Tired of kicking?! Boost your old CR250 with our electric start.
|Dimensions||11 × 11 × 10 in|
Battery Not included, Battery Included