GASKETS & SEALS KIT, COMPLETE PM09 ENGINE

Description

Gaskets and seals kit for complete overhaul of PM09 engine.

THIS KIT Includes

• 1x PAN00-S01 – WATER PUMP SHAFT SEAL 12X22X5
• 1x PAN00-S02 – RIGHT CRANK SEAL 38X58X11
• 1x PAN00-S03 – KICKSTART SEAL 20X28X5
• 1x PAN00-S07 – EXHAUST FLANGE O-RING 2.5X56MM
• 1x PAN00-S14 – MECHANICAL SEAL ASSEMBLY
• 1x PAN00-S17 – WATER PUMP COVER O-RING
• 1x PAN00-S21 – CLUTCH COVER O-RING 0.070X6.0IN
• 1x PAN00-S26 – HEAD SEAL, PISTON SEAL 105mm O-RING
• 1x PAN00-S27 – HEAD SEAL, WATER SEAL 135mm O-RING
• 1x PAN00-S28-PVL – POWERVALVE COVER O-RING 1X50MM
• 1x PAN00-S31-TRM – SPROCKET SHIM SEAL, D-RING
• 1x PAN00-S38-FUL – SEAL TB SHAFT 10X16X4mm
• 1x PAN00-S38-FUL – SEAL TB SHAFT 10X16X4
• 2x PAN00-S39-CYL – EXHAUST O-RING, 2.5X50mm, SILICONE
• 1x PAN00-S40-CYL – WATER OUTLET O-RING 2X22MM
• 1x PAN00-S40-CYL – O-RING 2×22,WATER OUT/PISTON CLUTCH SLAVE
• 1x PAN00-S40-CYL – O-RING 2x22mm, WAT. OUT/PISTON CLUTCH SLAVE
• 1x PAN00-S41-GEN – LEFT CRANK SEAL 22X40X7
• 1x PAN00-S42-GEN – SPROCKET SEAL
• 1x PAN00-S43-GEN – SHIFTER SHAFT SEAL 14X22X5
• 1x PAN00-S49-CYL – WATER INLET O-RING 2.4X22MM
• 1x PAN00-S51-PVL – POWERVALVE CAP O-RING 1x38MM
• 2x PAN07-GA05 – REED VALVE GASKET
• 1x PAN09-GA01 – CENTER CASE GASKET
• 1x PAN09-GA02 – CYLINDER BASE GASKET
• 1x PAN09-GA03 – CLUTCH CASE GASKET
• 1x PAN09-GA04 – FLYWHEEL COVER GASKET
• 1x PAN09-GA05-PVL – POWERVALVE ACTUATOR GASKET
• 1x PAN00-F161 – CRUSH WASHER, M10
• 8x PAN00-F29 – M8 STUD CRUSH WASHERS
• 1x PAN00-F30 – M6 CRUSH WASHER BRASS